 CryoStar
The CryoStar was introduced in August 2003, shortly
after its FDA approval for peripheral nerve
applications. It is a second generation
processor-controlled, gas based cryoanalgesic system.
The CryoStar is the original and successful digitally
controlled system that has accomplished several thousand
pain management procedures.
The CryoStar is well suited for of a broad range of
peripheral nerve applications encountered in pain
management, orthopedic and podiatric medicine. The
CryoStar is a full featured automated device that
operates on 4 “E” sized medical grade nitrous oxide
cylinders that are housed within the unit.
| Operating pressure range |
40-60kgl/cm2
570-850 psi |
| Freeze Control |
Footswitch (press to freeze, release to
defrost) |
| Electrical Ratings |
Input voltage range 85VAC to 264VAC
(50/60Hz) 220-240VAC (50Hz) |
| Power Rating |
40VA |
Nerve Locator
- Output amplitude ranges 0 – 5V and 0
– 0.5V
- Pulse within 250µs
- Pulse rate 2Hz (motor) & 100Hz
(sensory)
- Polarity positive or negative
selection
- Freeze mode freeze timer 4 digit
display of cumulative
- Elapsed freezing time (minutes and
seconds)
- Mode user selectable between manual
and automated treatments
- Temperature display bargraph
indication of probe temperature
|
| Dimensions
(approx) |
width 22 inches
depth 22 inches height 50 inches
weight 115 lbs |
The CryoStar is sold in two standard
configurations:
- With two standard CSP002 – 2.0 mm
Cryoanalgesia Probes
- With two standard CSP003 – 2.1 mm
Podiatry Probes
Part numbers:
CryoStar:
Probes:
- CSP001 – 1.3mm X 150mm Cryoanalgesia
Probe
- CSP002 – 2.0mm X 150mm Cryoanalgesia
Probe
- CSP003 – 2.1mm X 100mm Standard
Podiatry Probe
- CSP005 – 2.4mm X 100mm Plantar
Fasciitis Probe
|
|
